Defosil S-30 is a silicone based fluid defoamer with broad application in drilling fluids. It is capable of removing entrapped air from all types of water base mud at high temperature (above 200°C).
It has wider range of application in controlling foaming tendencies in sea water and polymer fluids as well. Defosil S-30 can be added directly to mud system.
Physical Properties |
|
Appearance | Liquid |
Specific Gravity | 1 Approx. |
Flammability | Non flammable |
Whether effective at 200°C+ | Yes |
Dosages for sever foaming in KCl, PHPA system (SG 1.70) | 0.1 % to 0.9 % (v/v) max. Depending upon the nature and severity/ of foam |
Chemical nature | Dispersion of highly effective silicone defoaming agents of various types in water |
Flash Point | 100°C Approx |
Pour Point | 1°C |
Boiling Point | > 100°C |
The treatment of the Defosil S-30 depends mainly on the nature of base fluid, type of foam, and severity/stiffness of foam. Normal dosage can vary from 0.1% to 0.9% (v/v) of the drilling fluid, depending upon the actual requirements at site
Hazard Identification
Aquadet does not have a restricted classification for transportation by regulatory agencies. It is a non-combustible product.
Spilled material may cause slipping. It can be washed with a stream of water or can be absorbed with absorbing agent like saw dust or sand.
On Skin contact: Wash with plenty of water and soap.
On contact with eyes: immediately wash affected eyes under running water and consult an eye specialist.
Aquadet should be stored in a clean and dry environment.
55 Gallons Steel Drum