SE Series Antifoams are highly effective silicone based antifoam emulsions, developed specially for various industrial applications where quick and long lasting de-foaming is required. The silicone content of SE series ranges from 10% – 50%.
SE Series antifoams are recommended for a wide variety of applications including the following:
SE Antifoams disperse easily in cold water. For maximum efficiency, product should be diluted with water in 1:1 ratio with mild agitation. Diluted product should be used within 24 hours. Generally, ½ Kg of antifoam per 1000 liters of foaming media is required. However, the exact quantity of antifoam required for a particular application can be determined by experimentation.
Typical Properties |
|||||
Grade | Active Contents | Appearance | Nature | pH | SG |
SE 10 | 10% | Off white viscous emulsion | Non-ionic | 7-8 | 1.0 |
SE 20 | 20% | Off white viscous emulsion | Non-ionic | 7-8 | 1.0 |
SE 30 | 30% | Off white viscous emulsion | Non-ionic | 7-8 | 1.0 |
oaming is a complex phenomenon and as such, pilot testing should be done for maximum efficiency.
The components of antifoam have a very low order of toxicity, although prolonged contact with the skin or eyes may cause some irritation.
Antifoam SE should be stored below 35°C. Some settling of the contents may occur with time but this has no effect on performance and product can easily be reconstituted by simple stirring or shaking. HSD-100 has a shelf life of 12 months in normal conditions
On Skin contact: Wash with plenty of water and soap
On contact with eyes: immediately wash affected eyes under running water and consult an eye specialist.
30 Kg Jerry cans, 120 & 200 Kg plastic drums
Any further technical information can be obtained from our technical staff via phone, fax or email