Silicone MRA-35 is a water-based silicone emulsion consisting of medium-viscosity dimethylsiloxane. Silicone MRA-35 emulsion creates a thin but very effective parting film. It does not carbonize at elevated temperature. It does not build up moulds and does not discolor or damage rubber or plastics.
is required.
Silicone MRA-35 can be used as
Typical Properties |
|
Appearance | Milky Liquid |
Emulsifying system | Non-ionic |
Emulsion Type | Oil in water |
pH | 5-8 |
Solid Content (%) | 37-38 |
Silicone MRA-35 can be used with or without diluting. Pilot testing should be done for maximum efficiency.
The product should be stored below in room temperature. Shelf life in closed container is 6 months.M
S30 Kg Jerry cans, 120 & 200 Kg plastic drums
Any further technical information can be obtained from our technical staff via phone, fax or email.
Silicone MRA-60 is a water-based silicone emulsion consisting of medium-viscosity dimethylsiloxane. Silicone MRA-60 emulsion creates a thin but very effective parting film. It does not carbonize at elevated temperature. It does not build up moulds and does not discolor or damage rubber or plastics.
Silicone MRA-60 can be used as
Applications |
|
Typical Properties |
|
Appearance | Milky Liquid |
Emulsifying system | Non-ionic |
Emulsion Type | Oil in water |
pH | 5-8 |
Solid Content (%) | 63-65 |
Silicone MRA-60 can be used with or without diluting. Pilot testing should be done for maximum efficiency.
The product should be stored below in room temperature. Shelf life in closed container is 6 months.
30 Kg Jerry cans, 120 & 200 Kg plastic drums
Any further technical can be obtained from our technical staff via phone, fax or email.